Installation

CAUTION: The vehicle should be on the ground before any bolts or nuts connected to rubber mounts or bushings are tightened.





NOTE:
- Wipe off any dirt, oil or grease from the threads before tightening the fasteners.
- The right and left damper forks are not interchangeable. The left damper fork is marked with "V4L" while the right damper fork is marked with "V4R".
- The right and left upper arms are not interchangeable. The left upper arm is marked with "VL" or "VLG" while the right arm is marked with "VR" or "VRG".
- The stabilizer bar is symmetrical. Install with the paint mark facing rear of the vehicle.
- After installing the suspension arm, check the front wheel alignment, and adjust if necessary.