Wiper and Washer Systems: Adjustments

Windshield Wiper/Washer:
1. Adjust the wiper arms so that their park positions match the illustration.

NOTE: If necessary, loosen the adjusting screws, and adjust the length of the passenger's side wiper sub-arm.




2. By inserting a tack and moving it as necessary, adjust the washer nozzles so that they aim at positions A, A', B, and B' shown in the illustration.

NOTE: The fluid jets should hit within a 50 mm (2.0 in) radius around each of points A, A', B, and B'.

Rear Window Wiper/Washer:
1. Adjust the rear window wiper arm so that its park position matches the illustration.




2. By inserting a tack and moving it as necessary, adjust the washer nozzle so that it aims at position C as shown in the illustration.

NOTE: The fluid jet should hit within a 50 mm (2.0 in) radius around point C.