Windshield Washer Reservoir: Testing and Inspection

1. Remove the washer filler assembly.
2. Remove the left inner fender.
3. Disconnect the washer hoses and 2P connectors from the washer reservoir.
4. Remove the two mounting bolts and washer reservoir.

Wipers/washers-Washer Reservoir/Hose Replacement:

5. Remove the washer nozzles and washer hoses.
6. Install in the reverse order of removal.

NOTE:
- To remove the rear washer nozzle, it is necessary to remove the tailgate spoiler.
- Take care not to pinch the hoses during reinstallation.
- Install the grommets firmly.
- After installation, adjust the aim of the washer nozzles.