Instrument Panel/Seats - R and R and Torque Spec Revised

BULLETIN NUMBER:
SB98-11-LOO1

ISSUE DATE:
MAY 1998

GROUP:
BODY

1998 RODEO (UE) WORKSHOP MANUAL CORRECTIONS

AFFECTED VEHICLES
1998 Rodeo (UE) models.

SERVICE INFORMATION
The information contained in the following table for the 1998 Rodeo (UE) Workshop Manuals has been revised:

Main Sub Section Page
Section
Body and Meter and Gauge 8E-10
Accessories
Body and Seats 8G-5
Accessories

In the Body and Accessories Section under the Meter and Gauge on page 8E-1O, the Meter Assembly Removal procedures have been revised. It is no longer necessary to remove the knee bolster to gain access to the meter assembly.

Also included in the Body and Accessories Section under the Seats on page 8G-5, the seatback nut torque specifications have been changed from 39 N.m (29 lb. ft.) to 29 N.m (22 lb. ft.).





8E-10 METER AND GAUGE





8G-5 SEATS