Operation CHARM: Car repair manuals for everyone.

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

EFFECTIVE DATE: 1/1/1994 Print date: 1/1/94

1. Chemical name and company name

Chemical Product Name Brite-Mark Yellow
Solvent Base Ink

Name of Manufacturer Mark-Tex Corporation
Manufacturer Address 161 Coolidge Ave.
Englewood, NJ 07631

Manufacturer Phone Number (800) 222-0876
(201) 567-4111

Chemtrex Number (800) 424-9300





2. Composition / Information on ingredients

3. Hazards Identification

The information on this Material Safety Data Sheet refers to inks used in pens and markers, however, it applies to these inks in bulk. The inks are contained in capillary or valve reservoir and will not spill or leak under normal conditions.

DOT SHIPPING NAME: UN 2867

DOT HAZARD CLASS: COMBUSTIBLE LIQUID




4. First Aid Measures

5. Fire Fighting Measures




Fire and Explosion Hazard Data




6. Accidental Release Measures




7. Handling and Storage

8. Exposure Control/Personal Protection Keep away from Heat, Fire, and Strong Oxidants.

9. Physical and Chemical Properties




Physical Data

10. Physical Hazard (Stability and Reactivity)




Fire and Explosion Hazard Data

11. Toxicological Information




Health Hazard Data

12. Ecological Information

No data available at this time

13. Disposal Considerations

Dispose waste in accordance to Local and Federal Regulations

14. Transport information other information

Handle in accordance with applicable laws and regulations.

15. Regulatory information

Handle in accordance with applicable Jaws and regulations.

16. Other information

^ Portions of the above evaluation of dangerous and harmful effects may be insufficient, please perform adequate investigation.

^ The content in this report is based on information, which was available as of the Effective date. But Mark-Tex Corporation, and its affiliates are not responsible for guaranteeing the above data and evaluations. The above data assumes usage under normal working conditions. In case special handling is required, please handle with suitable safety measures according to the application and usage.

^ The content in this report may charge due to new evaluation and tests, etc.