Rear Heater Duct, Defroster Nozzle and Ventilation Duct

Rear Heater Duct, Defroster Nozzle, Ventilation Duct and Associated Parts

Removal
1. Disconnect the battery ground cable.
2. Remove instrument panel assembly.
3. Remove center ventilation upper duct.
4. Remove side ventilation duct.
5. Remove center ventilation lower duct.
6. Remove driver lap duct.
7. Remove center console.
8. Remove rear heater duct.
9. Remove cross beam assembly.
10. Remove side defroster nozzle.
11. Remove center defroster nozzle.

Installation
To install, follow the removal steps in the reverse order. noting the following point:
1. Connect each duct and nozzle securely leaving no clearance between them and making no improper matching.