Seats: Description and Operation

The circuit breaker C/B-2 applies battery voltage at all times to the driver's and right front power seat switches.

Recline Operation
When the respective recliner switch is moved to FRONT battery voltage is applied to the respective rediner motor. The motor is grounded through the rear contact of the recline switch and the recliner motor's limit switch to B-26. The motor will run until the recline switch is released or the seat reaches the full recline position and the motor's limit switch opens. The contacts for REAR operation of the recline switch are wired the opposite way of the FRONT contacts, causing the motor to run in the opposite direction.

Slide Operation
When the tilt & slide switch (driver's) or slide switch (right front) is moved to FRONT battery voltage is applied to the respective slide motor. The motor is grounded through the REAR contact of the slide switch to B-26. The motor will run until the slide switch is released. The contacts for REAR operation of the slide switch are wired the opposite way of the FRONT contacts, causing the motor to run in the opposite direction.

Tilt Operation
Both tilt operations (front and rear) are similar to the recline operation.