Removal and Installation

REMOVAL

1. Disconnect the negative battery cable.






CAUTION: Refer to Battery Disconnect Caution in Service Precautions.




2. Move the PCM retention bar and retainer away from the PCM.




3. Remove the PCM from the PCM mounting bracket.
4. Remove the PCM electrical connectors.

INSTALLATION
1. Remove the Replacement PCM from the packaging.




2. Check the service number in order to make sure it is the same number as the defective PCM.




3. Install the PCM electrical connectors.




4. Slide the PCM retainer into the PCM bracket slots.
5. Pull the PCM retention bar into Position.