Antenna: Service and Repair

Removal Procedure
1. Remove the antenna mast.




2. Remove the radio antenna cable from the radio extension cable.




3. Remove the radio antenna cable nut.
4. Remove the radio antenna bezel.




5. Remove the radio antenna cable screws.
6. Remove the radio antenna cable.

Installation Procedure




1. Install the radio antenna cable.

NOTE: Refer to Fastener Note in Service Precautions.

2. Install the radio antenna cable screws.

Tighten
Tighten the radio antenna cable screws to 2.8 N.m (25 lb in).




3. Install the radio antenna bezel.
4. Install the radio antenna cable nut.

Tighten
Tighten the radio antenna cable nut to 6 N.m (53 lb in).




5. Install the radio antenna cable to the radio extension cable.
6. Install the antenna mast.