Removal and Installation

REMOVAL
1. Raise the vehicle. Refer to Vehicle Lifting Caution in Service Precautions.




2. Remove the Crankshaft position (CKP) sensor harness connector at the module.




3. Remove the CKP sensor mounting bolt (2).
4. Remove the CKP sensor from the engine (1).
5. Inspect the CKP sensor O-ring for wear, cracks or leakage. Replace if necessary.

INSTALLATION




1. Install the Crankshaft Position (CKP) sensor (1) into the block.
2. Install the CKP sensor mounting bolt (2).

Tighten
Tighten the CKP sensor mounting bolts to 8 N.m (71 lb In).

NOTE: Refer to Fastener Note in Service Precautions.




3. Install the CKP sensor harness connector.
4. Lower the vehicle.