Bracket Replacement - Steering Column

Removal Procedure

IMPORTANT: The upper steering column support bracket is not serviceable.

1. Remove the instrument panel.
2. Remove the brake switch.
3. Remove the brake booster pushrod from the brake pedal.
4. Remove the clutch master cylinder pushrod from the clutch pedal.




5. Remove the following steering column support bracket fasteners:
- The 4 flange nuts
- The 2 bolts
6. Remove the brake pedal from the upper steering column support bracket.

Installation Procedure




1. Install the brake pedal to the upper steering column bracket.

NOTE: Refer to Fastener Note in Service Precautions.

2. Install the upper steering column support bracket fasteners.

Tighten
- Tighten the nuts to 25 N.m (18 lb ft).
- Tighten the bolts to 25 N.m (18 lb ft).

3. Install the brake switch.
4. Install the clutch master cylinder pushrod from the clutch pedal.
5. Install the brake booster pushrod to the brake pedal.
6. Install the instrument panel.