Lower Center Trim Replacement - IP

Removal Procedure




1. Remove the screws that retain the instrument panel sound panel to the following components:
- The knee bolster
- The instrument panel
- The heater assembly
- The floor duct

2. Remove the instrument panel sound insulator from the vehicle.

Installation Procedure
1. Install the instrument panel sound insulator to the vehicle.

NOTE: Refer to Fastener Note in Service Precautions.





2. Install the screws that retain the instrument panel sound insulator to the following components:
- The knee bolster
- The instrument panel
- The floor duct

Tighten
Tighten the screws to 1.9 N.m (17 lb in).

3. Install the screws that retain the instrument panel sound insulator to the heater assembly.

Tighten
Tighten the screw to 1.5 N.m (13 lb ft).