Right Door Lock and Side Window Switch Operation

Place the ignition switch in the RUN position in order to complete the following actions:
- Supplies voltage through the PWR WIND circuit breaker to the right door lock and side Window switch
- Supplies voltage through CKT 1001 (DK GRN) to terminal F

Press the UP switch in the right front Window switch in order to supply battery voltage to the right front side Window regulator motor through CKT 666 (DK BLU). The motor is grounded through the following circuits:
- CKT 667 (BRN): The down contact in the Window switch
- CKT 167 (TAN): The down contact in the left front door lock and side Window switch

The motor runs in order to drive the Window UP. Press the DOWN Window switch in order to supply battery voltage to the Window regulator motor in the opposite direction through CKT 667 (BRN).

The motor is grounded through the following circuits:
- CKT 666 (DK BLU): The up contact in the Window switch
- CKT 166 (LT BLU): The up contact in the left front door lock and side Window switch

The motor runs in order to drive the Window DOWN.