Steering Column Shroud Replacement
Steering Column Shroud ReplacementRemoval Procedure
1. Remove the steering wheel. Refer to Steering Wheel Replacement.
2. Remove the tilt steering column lever (1) from steering column (2).
3. Remove the screws that retain the lower steering column trim cover to the steering column.
4. Remove the lower steering column trim cover.
5. Tilt the trim cover down and slide it back in order to disengage the locking tabs.
6. Remove the screws that retain the upper steering column trim cover to the steering column.
7. Remove the ignition lock cylinder. Refer to Starting and Charging; Starting System; Ignition Sitch; Ignition Switch Lock Cylinder; Service and Repair.
8. Remove the upper steering column trim cover.
Installation Procedure
1. Install the upper steering column trim cover.
2. Install the ignition lock cylinder. Refer to Starting and Charging; Starting System; Ignition Sitch; Ignition Switch Lock Cylinder; Service and Repair.
3. Install the screws that retain the upper steering column trim cover to the steering column.
Tighten
Tighten the upper steering column trim cover retaining screws to 1.4 N.m (i2 lb in).
4. Install the lower steering column trim cover.
5. Install the screws that retain the lower steering column trim cover to the steering column.
Tighten
Tighten the lower steering column trim cover retaining screws to 6 N.m (53 lb in).
6. Install the tilt steering column lever (1) to the steering column (2).
7. Install the steering wheel. Refer to Steering Wheel Replacement.