Window Replacement -Door
Removal ProcedureCAUTION: To prevent personal injury, gloves should be worn when removing broken glass.
1. Lower the Window about one half of the way down.
In this position, the Window regulator rollers should be accessible through the openings in the door panel.
2. Remove the Window run channels.
3. Remove the Window weather-strip.
4. Remove the door outer weather-strip.
5. Perform the following steps in order to remove the Window from the regulator:
1. Move the Window forward in order to release the sash channel from the rear regulator roller.
2. Carefully tilt the Window forward to a vertical position.
3. Pull the Window upward in order to release the sash channel from the front regulator roller.
6. Remove the Window from the door.
Installation Procedure
1. Install the Window to the door.
2. Perform the following steps in order to install the Window to the regulator:
G1.85GCarefully rotate the glass vertically.
2. Slide the sash channel downward into the front regulator roller.
3. Move the Window forward.
4. Align the rear of the sash channel with the rear regulator roller.
5. Slide the sash channel into the rear regulator roller.
3. Install the door outer weather-strip.
4. Install the Window weather-strip.
5. Install the door Window run channels.