Left Door Lock and Side Window Switch Operation

Place the ignition switch in the RUN position in order to supply battery voltage to the left front door lock and side Window switch through the following components:
- The PWR WIND circuit breaker
- CKT 1001(DK GRN)

Press the left front Window UP switch in order to supply battery voltage to the left front side Window regulator motor through CKT 164 (DK BLU). The Window motor is grounded through CKT 165 (BRN) and the Window switch DOWN contact.

The regulator motor runs to drive the Window to the UP position. Press the DOWN Window switch in order to provide battery voltage to the Window regulator motor in the opposite direction through CKT 165 (BRN). The Window regulator motor is grounded through the CKT 164 (DK BLU) and the Window switch UP contact. The motor runs in order to drive the Window down.