Transmission Speed Sensor: Service and Repair
Vehicle Speed Sensor ReplacementRemoval Procedure
Required Tools
- J 38417 Speed Sensor Remover
1. Remove the harness connector
2. Remove the bolt.
3. Remove the vehicle speed sensor using J 38417. Have a suitable container in order to catch the fluid.
4. Remove the O-ring seal.
Installation Procedure
Required Tools
- J 38417 Speed Sensor Remover
1. Install the new speed sensor and O-ring seal using J 35417.
2. Coat the seal with a thin film of transmission fluid.
3. Install the bolt.
Tighten
Tighten the bolt to 11 N.m (97 lb in).
4. Install the harness connector.
5. Refill the fluid as required. Refer to Fluid Capacity.