Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu Truck >> 1999 >> Rodeo LS 2WD V6-3.2L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Ignition System >> Ignition Control Module >> Service and Repair

Ignition Control Module: Service and Repair

REMOVAL
1. Disconnect battery ground cable.
2. Ignition Module Connector.




3. Removal Ignition Module (1).

INSTALLATION




1. Install the Ignition Module (1).
Connect ignition module connector and ignition coil, then tighten bolt to the specified torque.
Torque: 20 N.m (15lb ft)
2. Connect battery ground cable.

pro multis · About Operation CHARM