Interior Trim Panels

Interior Trim Panels and Associated Parts

Removal
1. Disconnect the battery ground cable.
2. Remove the rear end floor trim cover.




3. Remove the luggage room light.
- Remove the luggage room light lens (1) and the fixing screw.
- Disconnect the luggage room light connector.
4. Remove the rear root trim cover.
- Pry the trim cover clips free from the body panel.




5. Remove the rear seat belt lower anchor bolt cover and the lower anchor bolt (5).
6. Remove the quarter trim cover (1).
- Remove the tool box lid (3) and 3 fixing screws (4). Pry the quarter trim cover retainers (2) free from the body panel.
7. Remove the center lower trim cover.
- Remove the front seat belt lower anchor bolt cover and lower anchor bolt.
- Remove the sill plate and pry the trim cover clips free from the body panel.
8. Remove the center upper trim cover.
- Turn up the finisher and pry the trim cover clips free from the body panel.
9. Remove the front pillar trim cover
- Turn up the finisher and pry the trim cover clips free from the body panel.

Installation
To install, follow the removal steps in the reverse order, noting the following point:
1. Tighten the seat belt anchor bolt to the specified torque.
Torque: 39 Nm (29 lb.ft)