Accelerator Pedal: Service and Repair

REMOVAL




1. Disconnect the cruise control cable from the accelerator pedal assembly.




2. Disconnect the accelerator pedal control cable from the accelerator pedal assembly.




3. Disconnect the wiring harness from the kick-down switch.




4. Remove the two screws from the accelerator pedal assembly.
5. Remove the accelerator pedal assembly from the bulkhead.

INSTALLATION
1. Install the accelerator pedal assembly on the bulkhead.




2. Install the two screws to the accelerator pedal assembly.




3. Connect the wiring harness to the kick-down switch.




4. Connect the accelerator pedal control cable to the accelerator pedal assembly.




5. Connect the cruise control cable to the accelerator pedal assembly.