Throttle Cable/Linkage: Adjustments

Accelerator Cable Adjustment

1. Loosen the adjusting nut and lock nut.
2. Pull outer cable closing fully the throttle valve.




3. Tighten adjusting nut and lock nut temporarily.
4. Loosen adjusting nut by three turns and tighten lock nut. Then, manually operating the throttle valve, make sure that the valve lever returns up to the stopper screw.

IMPORTANT: The valve lever must return up to the stopper screw. If the valve lever does not reach the stopper screw, repeat the procedure again from step 1.




5. It does not reach the stopper screw, repeat from step 1