Front Seat Belt

Front Seat:

Removal
1. Disconnect the battery ground cable.
2. Remove the sill plate (Front & Rear).
3. Remove the seat belt lower anchor bolt.
4. Remove the center pillar lower trim cover.
5. Remove the door seal finisher (Front & Rear).
6. Remove the center pillar upper trim cover.
7. Remove the seat belt upper anchor bolt.
8. Remove the retractor.
9. Remove the adjustable shoulder anchor assembly.

Installation
To install, follow the removal steps in the reverse order, noting the following points.

1. Tighten the adjustable shoulder anchor assembly fixing bolts to the specified torque.

Torque: 39 N.m (29 lb ft)

2. Tighten the seat belt anchor bolts (Upper & Lower) and the retractor fixing bolts to the specified torque.

Torque: 39 N.m (29 lb ft)