Rear Seat Belt

Rear Seat:

Removal
1. Disconnect the battery ground cable.
2. Remove the tailgate weather strip.
3. Remove the rear end floor trim cover.
4. Remove the luggage room light.
- Remove the luggage room light lens (1) and the fixing screw.
- Disconnect the luggage room light connector.






5. Remove the rear roof trim cover.
- Pry the trim cover clips free from the body panel.

6. Remove the rear sill plate.
7. Remove the rear seat belt lower anchor bolt cover and the lower anchor bolt (5).






8. Remove the quarter trim cover (1).
- Remove the tool box lid (3) and 3 fixing screws (4). Pry the quarter trim cover retainers (2) free from the body panel.

9. Remove the slider plate trim assembly (2).
- Remove the two fixing screws from the adjustable shoulder anchor (1).
- Pull out the seat belt through the slider plate trim (3).






10. Remove the seat belt upper anchor bolt.
11. Remove the retractor.
12. Remove the rear seat belt assembly.
13. Remove the adjustable shoulder anchor assembly.
Remove the two fixing bolts.

Installation
To install, follow the removal steps in the reverse order, noting the following point.

1. Tighten the adjustable shoulder anchor assembly fixing bolts to the specified torque.

Torque: 39 N.m (29 lb ft)

2. Tighten the seat belt anchor bolts (Upper & Lower) and the retractor fixing bolts to the specified torque.

Torque: 39 N.m (29 lb ft)