Fuel Pump: Service and Repair

FUEL PUMP AND ASSOCIATED PARTS:

Fuel Pump and Associated Parts

REMOVAL

CAUTION: When repair to the fuel system has been completed, start engine and check the fuel system for loose connection or leakage. For the fuel system diagnosis, See Computers and Control systems / System diagnosis.

1. Disconnect battery ground cable.
2. Loosen fuel filler cap.
3. Support underneath of the fuel tank assembly (11) with a lifter.
4. Remove fuel tank assembly (11). Refer to Fuel Tank Removal.
5. Remove fuel pump and sender (FPAS) assembly (4) fixing snap ring and remove the FPAS assembly.

NOTE: After removing pump assembly (4), cover fuel tank to prevent any dust entering.

INSTALLATION
1. Install FPAS assembly (4).
2. Install fuel tank assembly (11). Refer to Fuel Tank Installation.
3. Fill the tank with fuel and tighten fuel filler cap.
4. Connect battery ground cable.