Seats: Description and Operation

Battery voltage is applied at all times to the driver's and right front power seat switches through circuit breakers (C/B-2).

Recline Operation
When you move the recline switch to FRONT, battery voltage is applied to the respective recline motor. The motor will run until you release the recline switch or the seat reaches the full recline position and the motor's limit switch opens. The motor is grounded through the rear contact of the recline switch and the recline motor's limit switch to G404. The contacts for REAR operation of the recline switch are wired the opposite way, causing the motor to run in the opposite direction.

Slide Operation
When the tilt & slide switch (driver's) or slide switch (passenger's front) is moved to FRONT, battery voltage is applied to the slide motor. The motor will run until you release the slide switch. The motor is grounded through the REAR contact of the slide switch to G404. The contacts for REAR operation of the slide switch are wired the opposite way, causing the motor to run in the opposite direction.

Tilt Operation
Both tilt operations (front and rear) are similar to the recline operation.