Headlamp: Service and Repair
Headlight and Associated Parts
Removal
1. Disconnect the battery ground cable.
2. Remove the screw and pull out the two projecting portions on the fender to remove the front combination light.
3. Remove five clips and two screws to remove the radiator grille.
4. Remove two bolts and two nuts to remove the headlight assembly (with bracket).
5. Remove the headlight bulb.
6. Remove two screws, two nuts and the spring for the headlight aim adjustment to remove the bracket.
7. Remove four screws to remove the rear cover.
8. Remove the headlight rim.
9. Remove the headlight.
Installation
To install, follow the removal steps in the reverse order.
CAUTION: After installing the headlight, be sure to adjust the headlight aim.