Front Door Panel: Service and Repair

Removal
1. Disconnect the battery ground cable.
2. Remove the power window switch/grip cover (1).
- Pry out the grip cover and disconnect the power window switch connector (3).
- Remove the two screws fixing the grip (4) to the door inner panel.




3. Remove the inside handle (2).
Remove the screw and then disconnect the inside handle link.




4. Remove the tweeter assembly (1).
- Pry the screw cover (2) off with the screwdriver and remove the screw.
- Pull the tweeter assembly backward.
- Disconnect the connector.




5. Remove the door trim assembly (1).
Pull out the door trim assembly at the nine clip positions (2).

Installation
To install, follow the removal steps in the reverse order.