Exhaust System: Description and Operation

ENGINE EXHAUST





General Description
When inspecting or replacing exhaust system components, make sure there is adequate clearance from all points on the underbody to prevent overheating the floor pan and possible damage to the passenger compartment insulation and trim materials.
Check complete exhaust system and nearby body areas and rear compartment lid for broken, damaged, missing or mispositioned parts, open seams, holes, loose connections or other deterioration which could permit exhaust fumes to seep into the rear compartment or passenger compartment. Dust or water in the rear compartment may be an indication of a problem in one of these areas. Any faulty areas should be corrected immediately.

Hangers
Various types of hangers are used to support exhaust system(s). These include conventional rubber straps, rubber rings, and rubber blocks.
The installation of exhaust system supports is very important, as improperly installed supports can cause annoying vibrations which can be difficult to diagnose.

Gasket
The gasket must be replaced whenever a new exhaust pipe, muffler or catalytic converter is installed.