Engine Fuel

Fuel Pump and Associated Parts:

Fuel Pump And Associated Parts

REMOVAL

CAUTION: When repair to the fuel system has been completed, start engine and check the fuel system for loose connection or leakage. For the fuel system diagnosis, see "Computers and Control Systems / System Diagnosis".
1. Disconnect battery ground cable.
2. Loosen fuel tiller cap.
3. Drain fuel.
Tighten drain plug to the specified torque after draining fuel.

Torque: 20 Nm (14 lb.ft) - M8

4. Remove fuel tank assembly (1).
5. Remove fuel pump assembly (2) fixing screws and remove the Fuel Pump assembly.

NOTE: After removing Fuel Pump, cover fuel tank to prevent any dust entering.

INSTALLATION
To install, follow the removal steps in the reverse order, noting the following points:
1. Install Fuel Pump assembly (2).
2. Install fuel tank assembly (1).
3. Fill the tank with fuel and tighten fuel filler cap.
4. Connect battery ground cable.