Throttle Cable/Linkage: Service and Repair

REMOVAL
1. Remove the engine cover.




2. Loosen the adjusting nut on the cable bracket mounting on the common chamber.




3. Remove the accelerator control cable (on the throttle valve end).




4. Remove the accelerator control cable (on the accelerator pedal end).
5. Remove the grommet.




6. Remove the accelerator control cable.

INSTALLATION




1. Install the accelerator control cable.
2. Install the grommet.




3. Install the accelerator control cable (on the accelerator pedal end).




4. Install the accelerator control cable (on the throttle valve end).




5. Install the adjusting nut.
6. Adjust the accelerator cable at the throttle body.
7. Install the engine cover.