Lateral Accelerometer: Service and Repair

Removal





1. Remove center console.
2. Remove clip (1) from G-sensor connector (2), then disconnect connector.
3. Remove G-sensor fixing screw (4).
4. Remove G-sensor (3).

Inspection and Repair
Refer to "Chart B-5." B-5

Installation
1. Install G-sensor assembly (3).
^ Care should be taken so that the G-sensor is not installed in the wrong direction.
2. Install G-sensor assembly fixing screw (4).
^ Tighten the fixing screw to the specified torque.

Torque: 6 Nm (52 inch lbs.)

3. Install G-sensor wiring connector (2) and clip (1).
4. Install center console.