Engine Fuel

Fuel Gauge Unit And Associated Parts:

Fuel Gauge Unit And Associated Parts

REMOVAL

CAUTION: When repair to the fuel system has been completed, start engine and check the fuel system for loose connection or leakage. For the fuel system diagnosis, see "Computers and Control Systems / System Diagnosis".

1. Disconnect battery ground cable.
2. Loosen fuel filler cap.
3. Drain fuel.
Tighten drain plug to the specified torque after draining fuel.

Torque: 20 Nm (14 lb.ft) - M8

4. Wiring connector
- Disconnect wiring connector (1) from the unit.

5. Fuel gauge unit
- Remove the fixing screws, then the fuel gauge unit (2).

NOTE: After removing fuel gauge unit, cover fuel tank to prevent any dust entering

INSTALLATION
To install, follow the removal steps in the reverse order, noting the following points:
1. Fuel gauge unit (2).

2. Wiring connector (1).
- Connect the wiring connector to the fuel gauge unit.
- Fill the tank with fuel and tighten fuel filler cap.
- Connect battery ground cable.