Sprocket and Mechanical Lock

Sprocket and Mechanical Lock





Disassembled View
Reassembly
1. Connect the hose and strainer to the oil pump.
2. Install the oil pump assembly to the output shaft and attach the magnet to the strainer set position.
3. Install thrust washer.
4. Install the spring to the lock-up fork.
5. Install the lock-up sleeve together with the lock-up fork to the output shaft and reduction fork assembly each other.





6. Install the spring retainers to the lock-up fork.
7. Install the mechanical lock hub.
8. Apply ATF to the chain.
9. Engage the chain to both sprockets.





10. Install the chain and sprocket assembly to both output shafts.
11. Install the front tone wheel and sprocket spacer.