Output Shafts and Shift Control Shaft

Output Shafts and Shift Control Shaft








Disassembled View
Disassembly





1. Remove the output shaft.
2. Remove the detent spring.
3. Remove the cam pilot block set bolts.





4. Remove the reduction fork assembly and cam assembly together with the reduction hub.





5. Remove the spring pin that fixes the reduction fork to the lock-up shaft.
6. Remove the reduction fork.
7. Remove the lock-up shaft.





8. Using snap ring pliers, remove the snap ring from the cam pilot block.
9. Remove the washer.
10. Remove the cam.
11. Remove the cam pilot block.





12. Using snap ring pliers, remove the snap ring from the shift lever shaft.
13. Remove the reduction lever assembly.
14. Remove the snap ring.
15. Remove the shifter lever shaft.





16. Remove the front output shaft.
17. Remove the transfer case assembly.