Sprocket and Mechanical Lock

Sprocket and Mechanical Lock





Disassembled View
Disassembly
1. Remove the sprocket spacer.
2. Remove the front tone wheel.





3. Remove the drive sprocket, lower drive sprocket, and chain together from the front and rear output shafts.
4. Remove the mechanical lock hub.





5. Remove the spring retainer from the connection between lock-up shaft and lock-up fork.
6. Remove the lock-up fork and lock-up sleeve.
7. Remove the thrust washer.
8. Remove the magnet from the strainer set position together with the oil pump assembly.
9. Remove the strainer from the oil pump assembly.
10. Remove the hose from the oil pump assembly.