Center Closeout/Insulator Panel

Removal Procedure




1. Remove the screws that retain the instrument panel sound insulator to the following components:
- The knee bolster
- The instrument panel
- The heater assembly
- The floor duct

2. Remove the instrument panel sound insulator from the vehicle.
3. Disconnect the electrical connector from the accessory power outlet (if equipped).

Installation Procedure




1. Connect the electrical connector to the accessory power outlet (if equipped).
2. Install the instrument panel sound insulator to the vehicle.

NOTE: Refer to Fastener Note in Service Precautions.

3. Install the screws that retain the instrument panel sound insulator to the following components:
- The knee bolster
- The instrument panel
- The floor duct.

Tighten
Tighten the screws to 1.5 N.m (13 lb in).

4. Install the screw that retains the instrument panel sound insulator to the heater assembly.

Tighten
Tighten the screw to 1.5 N.m (13 lb in).