Camshaft Installation

1. Apply clean engine oil or engine oil supplement to the following components:
^ The engine camshaft lobes
^ The camshaft bearing journals
^ The camshaft bearings

2. Install three 5/16-18 x4.0 inch bolts into the engine camshaft front bolt holes.

Notice: All camshaft journals are the same diameter, so care must be used in removing or installing the camshaft to avoid damage to the camshaft bearings.

3. Use the bolts as a handle in order to install the engine camshaft.
4. Remove the 3 bolts from the front of the engine camshaft.





5. If reusing the fasteners, apply threadlock to the threads of the camshaft retainer bolts.
6. Install the camshaft retainer and bolts.
Tighten the camshaft retainer bolts to 12 Nm (106 inch lbs.).