Interior Light Switch: Service and Repair

Removal Procedure

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notes.




1. Disconnect the battery negative cable.
2. Remove the instrument panel sound insulator (right side only). Refer to Closeout/Insulator Panel Replacement - Right in Interior Trim.




3. Reach up and disconnect the electrical connector.
4. Squeeze the locking tabs in order to remove the door jamb switch from the vehicle.

Installation Procedure




1. Install the doorjamb switch to the vehicle. Fully seat the locking tabs.




2. Connect the electrical connector to the switch.
3. Install the instrument panel sound insulator (right side only). Refer to Closeout/insulator Panel Replacement - Left in Interior Trim.
4. Connect the battery negative cable.