Cylinder Head Assembly
| Cylinder Head Bolt (Preferred Method) | All Bolts First Pass in Sequence | 30 Nm (22 ft.lb) |
| Long Bolt (1, 4, 5, 8, 9) Final Pass in Sequence | 75 degrees | |
| Medium Bolt (12, 13) Final Pass in Sequence | 65 degrees | |
| Short Bolt (2, 3, 6, 7, 10, 11) Final Pass in Sequence | 55 degrees | |
| Cylinder Head Bolt (Optional On Vehicle Strategy) | First Pass in Sequence | 26 ft.lb |
| Second Pass in Sequence | 44 ft.lb | |
| Final Pass in Sequence | 66 ft.lb | |
| Surface Flatness | 0.004 in Maximum | |
| Cylinder Head Core Hole Plug | 15 ft.lb | |
| Engine Wiring Harness Bracket Bolt to Rear of Cylinder Head | 26 ft.lb |