Automatic Transmission - 4L60-E

Removal Procedure

^ Required Tools
- J 38417 Speed Sensor Remover





1. Remove the harness connector
2. Remove the bolt.
3. Remove the vehicle speed sensor using J 38417. Have a suitable container in order to catch the fluid.
4. Remove the chamfer seal.

Installation Procedure

^ Required Tools
- J 38417 Speed Sensor Remover





1. Install the new speed sensor and chamfer seal using J 38417.
2. Coat the seal with a thin film of transmission fluid.
3. Install the bolt.
^ Tighten the bolt to 11 Nm (97 inch lbs.).
4. Install the harness connector.
5. Refill the fluid as required.