Scan Tool Data Definitions

The Data Display function contains lists of ABS data parameters. A brief description of all ABS data parameters available on the scan tool are listed below: The list is arranged in alphabetical order.
4WD Status
This display indicates if the vehicle is in 2WD or 4WD.
ABS Lamp Command
This indicates the state of the ABS indicator.
ABS Pump Motor
This display indicates the commanded state of the ABS pump motor.
ABS Stop State
This parameter indicates if the ABS is currently in an ABS event or not.
ABS Relay Command
This display indicates the actual state of the electronic brake control relay.
Brake Fluid Level Switch
Display shows actual status of the Brake Fluid Level Switch.
Brake Switch Status
This parameter indicates the state of the brake switch.
Brake Warning Lamp Cmd
This indicates the state of the BRAKE indicator.
DRP Active
This parameter indicates if DRP is currently active.
LF Dump Valve Command
This display indicates the commanded state of the left front Dump solenoid valve.
LF Dump Valve Feedback
This display indicates the commanded state of the left front Dump solenoid valve feedback.
LF ISO Valve Command
This display indicates the commanded state of the left front Isolation solenoid valve.
LF ISO Valve Feedback
This display indicates the commanded state of the left front Isolation solenoid valve feedback.
Left Front Wheel Speed
Display shows actual wheel speed of the left front wheel.
Rear Dump Valve Command
This display indicates the commanded state of the rear Dump solenoid valve.
Rear Dump Valve Feedback
This display indicates the commanded state of the rear Dump solenoid valve feedback.
Rear ISO Valve Command
This display indicates the commanded state of the rear Isolation solenoid valve.
Rear ISO Valve Feedback
This display indicates the commanded state of the rear Isolation solenoid valve feedback.
Rear Wheel Speed
Display shows actual wheel speed of the rear wheel.
RF Dump Valve Command
This display indicates the commanded state of the right front Dump solenoid valve.
RF Dump Valve Feedback
This display indicates the commanded state of the right front Dump solenoid valve feedback.
RF ISO Valve Command
This display indicates the commanded state of the right front Isolation solenoid valve.
RF ISO Valve Feedback
This display indicates the commanded state of the right front Isolation solenoid valve feedback.
Right Front Wheel Speed
Display shows actual wheel speed of the right front wheel.