Operation CHARM: Car repair manuals for everyone.

Material Safety Data Sheet


MATERIAL SAFETY DATA SHEET

EFFECTIVE DATE: 1/1/1994 Print date: 1/1/94

1. Chemical name and company name

Chemical Product Name Brite-Mark Yellow

Solvent Base Ink

Name of Manufacturer Mark-Tex Corporation
Manufacturer Address 161 Coolidge Ave.
Englewood, NJ 07631
Manufacturer Phone Number (800) 222-0876
(201) 567-4111
Chemtrex Number (800) 424-9300





2. Composition / Information on ingredients

3. Hazards Identification

The information on this Material Safety Data Sheet refers to inks used in pens and markers, however, it applies to these inks in bulk. The inks are contained in capillary or valve reservoir and will not spill or leak under normal conditions.

DOT Shipping Name UN 2867

DOT Hazard Class Combustible Liquid




4. First Aid measures

5. Fire fighting measures




Fire and Explosion Hazard Data




6. Accidental release measures




7. Handling and storage




8. Exposure control / personal protection Keep away from Heat, Fire, and Strong Oxidants.

9. Physical and chemical properties




Physical Data

10. Physical hazard (stability and reactivity)




Fire and Explosion Hazard Data




11. Toxicological information

HEALTH HAZARD DATA

12. Ecological information

No data available at this time

13. Disposal considerations

Dispose waste in accordance to Local and Federal Regulations

14. Transport information other information

Handle in accordance with applicable laws and regulations.

15. Regulatory information

Handle in accordance with applicable laws and regulations.

16. Other information

^ Portions of the above evaluation of dangerous and harmful effects may be insufficient, please perform adequate investigation.

^ The content in this report is based on information, which was available as of the Effective date. But Mark-Tex Corporation, and its affiliates are not responsible for guaranteeing the above data and evaluations. The above data assumes usage under normal working conditions. In case special handling is required, please handle with suitable safety measures according to the application and usage.

^ The content in this report may charge due to new evaluation and tests, etc.