Air Duct: Service and Repair

Rear Heater Duct, Defroster Nozzle and Ventilation Duct

Rear Heater Duct, Defroster Nozzle, Ventilation Duct And Associated Parts:

Removal
1. Disconnect the battery ground cable.
2. Remove instrument panel assembly.
3. Remove center ventilation duct and side defroster duct.
- Remove 5 screws.
4. Remove lap ventilation duct.
5. Remove instrument panel brackets.
6. Remove cross beam assembly.
7. Remove ventilation lower duct.
8. Remove rear heater duct.
- Remove foot rest carpet and 3 clips.
9. Remove defroster nozzle.

Installation
To install, follow the removal steps in the reverse order, noting the following point:
1. Connect each duct and nozzle securely leaving no clearance between them and making no improper matching.