Lamps Test

Lamps Test
This test is conducted check MIL and Low Fuel Lamp for its working.
Tech 2 must be used for this test.

Test Procedure:
1. Connect Tech 2 to the vehicle DLC.
2. Run the Engine at idle.




3. Select F3 : Miscellaneous Test in the Application Menu.




4. Select F0 : Lamps Test in the Miscellaneous Test.




5. Select F0 : Malfunction Indicator Lamp.
6. Push "On" soft key.
- Make sure Lamp illuminates.
- If lamp illuminates, the Lamp is operating correctly.




7. Select F2 : Up Shift Lamp

8. Push "On" of soft key.
- Make sure Lamp illuminates.
- If Lamp illuminates, the Lamp is operating correctly.




9. Select F2 : Low Fuel Lamp

10. Push "On" of soft key.
- Make sure Lamp illuminates.
- If Lamp illuminates, the Lamp is operating correctly.




11. Select F3 : Reduced Power Lamp

12. Push "On" of soft key.
- Make sure Lamp illuminates.
- If Lamp illuminates, the Lamp is operating correctly.




13. Select F5 : Cruise Control Lamp

14. Push "On" of soft key.
- Make sure Lamp illuminates.
- If Lamp illuminates, the Lamp is operating correctly.