Lifting Instructions
CAUTION:- If a lifting device other than the original jack is used, it is most important that the device be applied only to the correct lifting points Raising the vehicle from any other point may result in serious damage.
- When jacking or lifting a vehicle at the frame side rail or other prescribed lift points, be certain that lift pads do not contact the catalytic converter, brake pipes or cables, or fuel lines. Such contact may result in damage or unsatisfactory vehicle performance.
Lifting Points and Supportable Point Locations
Lifting Point: Front
When using a floor jack, lift on the Convex portion of the skid plate.
Supportable Point: Front
Position the chassis stands at the bottom of the frame sidemember, behind the front wheel.
Lifting Point: Rear
Position the floor jack at the center of the rear axle case when lifting the vehicle.
Supportable Point: Rear
Position the chassis stands at the bottom of the frame sidemember, just behind the trailing link bracket.
Supportable Point: Rear
Position the chassis stands at the bottom of the rear axle case.