B-24

Part 1 Of 2:

Part 2 Of 2:

CHART B-24 SENSOR SIGNAL INPUT ABNORMALITY (DTC 65)

Sensor Signal Abnormality Criteria Using Tech 2
1. While driving, the speed of one or two wheels 25% or more higher than that of the other wheels.
2. The speed of one or two wheels is 10 km/h (6 mph) or more higher than that of the other wheels.
3. During steady driving, wheel speed changes abruptly.
*The vehicle must run on a level paved road.

NOTE: Even after repairing the faulty part the Warning Light (W/L) does not go out if the vehicle is at a stop. Turn the ignition switch to the ON position and drive the vehicle at 12 km/h or higher to make sure that the warning light goes out.

It is important to verify that the correct tires are installed on vehicle.