Center Pillar and Roof Side Trim Cover

Center Pillar and Roof Side Trim Cover

Center Pillar, Roof Side Trim Cover and Associated Parts:

Removal

1. Disconnect the battery ground cable.
2. Remove the door sill plate (front and rear).
3. Remove the center pillar lower trim cover (2).
- Turn up the finisher (1) and pry the trim cover retainers free from the body panel, then slide the trim cover downward.







4. Remove the front seat belt anchor bolt cover (3) and the anchor bolt (4).







5. Remove the center pillar upper trim cover (6).
- Turn up the finisher (5) and pry the trim cover retainers free from the body panel.







6. Remove the center pillar assist grip.
7. Remove the seat belt anchor plate.
8. Remove the assist grip (7).
- Open the both side of the assist grip cover (8) and remove two fixing screws.







9. Remove the roof side trim cover (9).
- Turn up the finisher (10) and pry the trim cover retainers free from the body panel.







Installation

To install, follow the removal steps in the reverse order, noting the following point.
1. Install the seat belt anchor bolts to the specified torque.
Torque: 39 N.m (29 lb ft)