Front Door Waist Seal

Front Door Waist Seal

Parts Location:

Removal

1. Disconnect the battery ground cable.
2. Remove door mirror.
3. Remove front door waist seal.
- Remove the fixing screw and pull out the waist seal (1) from the door frame while prying it up.







Installation

To install, follow the removal steps in the reverse order, noting the following point.

1. Apply soap and water to the inside of the waist seal and align the screw hole of the waist seal to the door panel hole, and gently tap the seal with a rubber hammer.

Be sure not to tap the seal hard. This may result in deforming the seal.