Quarter Window Glass: Service and Repair

Rear Quarter Side Glass

Parts Location:

Removal

1. Disconnect the battery ground cable.
2. Remove rear quarter upper trim panel.
3. Remove ventilation assembly.
4. Remove valve assembly.
5. Remove rear quarter side glass.

Installation

1. Install the rear quarter side glass.
- Clean the bonding surfaces of both the glass and the body panel.
- Install the fasteners (1) to the fixed positions of the glass and the body panel.







- Always use new fasteners.
- Be absolutely sure to apply glass primer to the side glass.







- Apply a sealing adhesive (1) to the glass circumference.







- Apply PVC primer (4) to the A clip portion.
- Insert the fixing clip on the side glass into the body panel.
- Push the side glass against the body panel and bond them.
- Cure the adhesive at a temperature of 20-30 °C (68-86 °F) for 24 hours.
- Check that the rear quarter side glass does not leak water.

2. Install the valve assembly.
3. Install the ventilation assembly.
4. Install the rear quarter upper trim panel.