Front Door: Service and Repair

Front Door Assembly

Parts Location:

Removal

1. Disconnect the battery ground cable.
2. Remove door check arm pin (1).







3. Remove hinge bolt.
- Align the hinge bolt to the door side hinge and put a marker on it.

4. Remove door harness connection (2).
- Pull the door harness grommet out in order to disconnect the harness connection.







5. Remove front door assembly.

Installation

To install, follow the removal steps in the reverse order, noting the following points:
1. Align the door fitting to the body by referring to Body Dimensions.
2. Tighten the door hinge bolts to the specified torque.
Torque: 34 N.m (25 lb ft)

3. Apply chassis grease to the door check arm pin and the door hinge moving surface.